by Orella Rodger | Mar 5, 2025 | Technical
Generally these larger systems involve multiple sub suites which all operate independently of each other – for instance you might have a ‘maintenance’ sub suite with all the riser doors on and a ‘cleaners’ sub suite which allows access to store doors. However, this...
by Orella Rodger | Jan 27, 2025 | Installation Guides
Bolt Through Use M8x60mm bolts for doors up to 44mm thick, M8x70mm for doors between 44 and 54mm thick Measure the fixing centres on the pull handle Drill 8.2-8.5ml diameter holes in the door at these centres Hold the handle against the holes, then screw the bolt into...
by Orella Rodger | Jan 17, 2025 | Installation Guides
FP Lever Handles >Instructions 1.Ensure that the 8mm spindle and bolt through fixings are long enough to work with yourdoor. If the door is thicker than 44mm, you may need longer fixings and spindle. 2.Insert the spindle into one of the lever handles. Ensure that...
by Orella Rodger | Jan 17, 2025 | Installation Guides
FST Lever Handles >Instructions 1.Ensure that the 8mm spindle and bolt through fixings are long enough to work with your door. If the door is thicker than 44mm, you may need longer fixings and spindle. 2.Insert the spindle into one of the lever handles....
by Orella Rodger | Jan 17, 2025 | Technical
Bolt Through This is the most common and probably also the most secure method of fixing. The handle is bolted through from the other side of the door with a flanged head bolt, usually with an M8 thread. This means that the bolt heads are visible on the other side of...
